Top 10 Pi Zero USB HUB – Computer Networking Hubs

As an Amazon Associate I earn from qualifying purchases.

1. LoveRPi

#ad

LoveRPi MicroUSB to USB 4 Port Black OTG Hub for Raspberry Pi Zero

#ad
LoveRPi #ad - Full size usb ports for raspberry pi zero: simple plug and play USB hub for MicroUSB OTG capable devices including HP, Dell, Lenovo, and Acer Computers and Tablets. Integrate it directly into your customized project! It is laid out ideally so that each port can be used and interference is minimized.

Non-blocking ports: our hub is laid out so that multiple USB devices can be plugged in without blocking each other. For raspberry pi zero, we recommend using our LoveRPi 2. 5a certified power supply with power switch for best results. Requires high quality 1a or higher power capability: the host device must provide adequate power to the connected USB devices or the USB devices may not be recognized or disconnect during use.

Full speed usb 2. 0 passthrough: get the most bandwidth for your USB based devices without sacrificing performance through our reliable USB hub chipset. Available in black and white and project ready: need to add USB ports to a Raspberry Pi 0 project? The external case can be disassembled by pulling the top and bottom apart.
BrandLoveRPi #ad
ManufacturerLoveRPi #ad
Height0.4 Inches
Length5.1 Inches
Width2.9 Inches
Part NumberLRP-OTG4HUB-BLK
ModelOTG4HUB

2. MakerSpot

#ad

MakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero V1.3 with Camera Connector and Pi Zero W with Bluetooth & WiFi

#ad
MakerSpot #ad - 4-port usb 2. 0 plug-and-play hub. Gold-plated and low-resistance spring-loaded pogo pins. Usb 2. 0 high speed, transfer rate up to 480Mbps. 2-way back-power protection circuitry on Pi Zero connection path. Bus-powered from pi zero, or powered externally via the Hub's micro-USB port. Support maximum 2. 3a current if powered by external USB charger. Over current protection and led indication if power rail draws more than 2. 3a. Raspberry pi zero shown in the photos is for illustrative purpose only and is not included in this offer. Compatible with USB 1. 1 and 2. 0 devices.
BrandMakerSpot #ad
ManufacturerMakerSpot #ad
Part NumberBH10128
ModelBH10128

3. Smays

#ad

OTG Micro USB Ethernet Network Adapter for Raspberry Pi Zero, Google Nexus Player, Windows Android Tablet, Powered HUB

#ad
Smays #ad - Driver-less design for windows 8. 1 / 10 32/64 bit or up, Mac OS 109 or up, and Android 6. 0 or up operation system, Chrome OS. Android users, before you buy, be sure to look if the device has a grayed out "Ethernet" menu in Settings under WIRELESS & NETWORKS.

It has limited android compatibility. Host otg cable to 3 usb & lan adapter -- adds additional 3-Port OTG USB extension; Adds 10/100 Mbps wired internet connectivity. Compatible for raspberry pi 2, notebook, Tablets, Amazon Fire TV Stick, and computer with one available micro-b port. Most probably it will just work then. Built-in dc power port, supports 5v power adapter, a power cable included; It only powers USB 2. 0 hub and not the host; It charges the added USB device.
BrandSmays #ad
ManufacturerSMAYS #ad
Height0.59 Inches
Length3.74 Inches
Weight0.07 Pounds
Width0.83 Inches
Part Numbermicrob-hub-8152
ModelSMAYS-ETHERNET-ADAPTOR-HUB

4. MakerSpot

#ad

MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux

#ad
MakerSpot #ad - Compatible with samsung galaxy s2, samsung galaxy s3/s4, galaxy tab3 8. 0, sony xperla nx-02d, samsung Galaxy Note, Sony Xperla acro HDIS12S.

Toshiba regza phone-to1D, and Sony S-series Tablet. Easy plug and play installation device, Camera, Keyboard, for Mouse, no external power needed No driver needed for Android and PC with USB 2.00 port transfer Rate: USB2. 0, 1. 5mbps. Draws power only from oTG port, current for USB devices is limited to host capability. With usb2. 0 4-port hub, u disk, 480/12mbps, printer and so on. Expands into 4 usb ports for raspberry pi zero v1. 3 with camera connector and w with Bluetooth and Wifii, ODROID, Orange Pi, Banana Pi.
BrandMakerSpot #ad
ManufacturerMakerSpot #ad
Height1 Inches
Length3 Inches
Weight0.04 Pounds
Width2 Inches
Part NumberLYSB01JL837X8-ELECTRNCS
ModelAH10094

5. waveshare

#ad

4 USB Ports Compatible with USB2.0/1.1 Onboard USB to UART Onboard Multi Indicators, 4-Port Raspberry Pi USB HUB HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W

#ad
waveshare #ad - Onboard usb to uart, with enable / disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict. Onboard multi indicators, usb to UART, for monitoring the status of power, and each USB port. This is a 4 port usb hub for raspberry pi, provides more USB capability to your Pi, what's more, it features USB to UART converter for easy serial communication. It can work with various versions of the pi, and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH. It can also fit in raspberry Pi 2B/3B/3B+/4B. 4 usb ports, compatible with USB2. 0/1. 1.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part Number4-Port USB HUB HAT for RPi
Model4-Port USB HUB HAT for RPi

6. MakerSpot

#ad

MakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero W V1.3 with 2.4A Power Supply & 1.5m Micro USB Cable with On Off Switch

#ad
MakerSpot #ad - If you are looking for the hub version compatible with Pi Zero v1. 2, check out the v1. 1 & v1. 2 stackable USB Hub. Package included: 4-port usb hub hat, 2.

4a power supply UL Listed, 1. 5m micro usb cable with On Off Switch. Usb port position rearrangements to provide best adaptability to USB devices in different sizes. This stackable usb hub design is not compatible with the older pi zero v1. 1 & v1. 2 the one without camera port. Modified spring loaded pogo pin locations to support the Pi Zero v1. 3 the one with the camera port. Pogo pins and the four supporting poles have been elongated to further increase the headroom between the Pi Zero board and the USB hub board, hence, longer header pins are allowed for the Pi Zero header.
BrandMakerSpot #ad
ManufacturerMakerSpot #ad
Height1 Inches
Length7.5 Inches
Weight0.25 Pounds
Width5.2 Inches
Part NumberBH10128
ModelBH10128PSU

7. HiLetgo

#ad

HiLetgo CP2102 USB to UART 4 USB Ports Raspberry Pi Expansion Board USB2.0/1.1 USB HUB for Raspberry Pi Zero/Zero W/4B/3B+ 5V

#ad
HiLetgo #ad - 4 port usb hub hat for raspberry pi, USB to UART Onboard. Onboard usb to uart, convenient for Raspberry Pi serial debugging. Onboard multi indicators, usb to UART, for monitoring the status of power, and each USB port.4 usb ports, compatible with USB2. 0/1. 1.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Part Number3-01-1502-US

8. waveshare

#ad

Raspberry pi 4 Port USB HUB HAT Compatible with USB2.0 1.1 for Various Version of Raspberry Pi Perfectly Fit Zero/Zero W/Zero WH Serial Debugging Onboard USB to UART

#ad
waveshare #ad - Onboard usb to uart, convenient for Raspberry Pi serial debugging. 4 usb ports, compatible with USB2. 0/1. 1. Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port.4 port usb hub hat for raspberry pi, USB to UART Onboard.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Height0.39 Inches
Length1.57 Inches
Weight0.15 Pounds
Width0.79 Inches
Part NumberUSB HUB HAT

9. iUniker

#ad

IUniker Raspberry Pi Zero W OTG Cable, MicroUSB to USB 4 Port OTG Hub for Raspberry Pi Zero/ Zero W/ Zero WH

#ad
iUniker #ad - 1a or higher power capability is neededthe device have to provide adequate power to the connected USB devices or the USB devices may not be recognized or disconnect during use.

18-month warrantyno worry for the product Quality, iUniker provide a 18-Month Money Back Warranty. 4 pcs full size usb ports for raspberry pi zeroplug and play usb hub for microusB OTG devices: Raspberry Pi Zero and other Microusb Devices. No blocking our otg hub is laid out so that many USB devices can be plugged in without blocking each other at the same time. Full speed usb 2. 0 get the most bandwidth for your USB based devices without sacrificing performance through our OTG USB Hub.
BrandiUniker #ad
ManufactureriUniker #ad
Warranty12-Month

10. Bicool

#ad

RJ45 Ethernet Port 802.3af-Compliant, 3X USB 2.0 Ports, Power Over Ethernet PoE Ethernet/USB HUB HAT for Raspberry Pi Zero/Zero W/Zero WH

#ad
Bicool #ad - Extended ethernet port: incorporates rtl8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port. 3x extended usb 2. 0 ports, compatible with USB 2. 0 / 1. 1. Poe ethernet power over ethernet / zero w / usb hub HAT for Raspberry Pi Zero / Zero WH, 802.3af-compliant. By using this small hat and some proper 802. 3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable, along with 3x extended USB ports. 5. Fully isolated sMPS Switch Mode Power Supply.
BrandBicool #ad
ManufacturerBicool #ad
Part NumberBC-PoE/ETH/3xUSB HUB HAT Board