Top 10 Jetson Nano Case – Computer Cases

As an Amazon Associate I earn from qualifying purchases.

1. waveshare

#ad

Acrylic Clear Case Enclosure Specialized for Jetson Nano 2GB Developer Kit(Case only

#ad
waveshare #ad - Nice looking, dust resistance. Acrylic case type a for Jetson Nano 2GB Developer Kit. Good quality. Cut-outs for the essential Ports And TF Card. Easy access for gPIO And Camera Port.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part NumberJetson Nano Clear Case
ModelJetson Nano Clear Case

2. GeeekPi

#ad

GeeekPi Jetson Nano Case Support Jetson Nano B01 and A02 Version, Jetson Nano Case with Fan for NVIDIA Jetson Nano Developer Kit Small AI Powerful Computer

#ad
GeeekPi #ad - Package includes:1x acrylic clear case with Screws & nuts;1x Cooling Fan;1x screwdriver;1xPincette. Acrylic case with cooling fan for jetson nano developer kitsupport Jetson Nano B01 and A02 Version. Metal case for jetson nano a02 Version, please refer to Asin: B07VVJNXMB. Easy to assemble and provides full access to your Jetson Nano. Great heat dissipation performance. Comes with assembly screwdriver and Pincette. High quality acrylic case with fan secures your Jetson Nano.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad

3. waveshare

#ad

Metal Case Enclosure Specialized for Jetson Nano 2GB Developer Kit with Camera Holder,Reset,Power Buttons Compatible with Waveshare IMX219 Series Camera, Cooling Fan Fan-4010-5V

#ad
waveshare #ad - 4. Reset and power buttons. With system status indicator, More Easy To Check The Working Status. 1. Precise opening design. Cut-outs for gpio header, TF Card, And Peripheral Ports. 3. Invisible cooling fan. Heat dissipation through The Airflow Vent On The Top, More Elegant Design. 5. Enabling the 4g communication. Allows installing 4G Module Inside. Recommendation: sim7600G-H 4G for Jetson Nano. 2. Special camera holder. With camera mounting Holes, Up To 180° Roll Angle.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part NumberJetson Nano Metal Case (E)
ModelJetson Nano Metal Case (E)

4. waveshare

#ad

Metal Case C Enclosure with Fan for Jetson Nano Developer Kit and B01 Version with Camera Holder,Reset,Power Buttons Compatible with Waveshare IMX219 Series Camera,Wireless-AC8265

#ad
waveshare #ad - Jetson nano developer Kit Original Version and New Version B01. Invisible cooling fan--heat dissipation Through The Airflow Vent On The Top, More Elegant DesignThe fan is not included.

5v fan--dedicated cooling fan for Jetson Nano, PWM Speed Adjustment, Strong Cooling Air. Special camera holder--mounting holes For Single Camera Or Binocular Camera, Up To 180° Roll Angle. Reset and power buttons--with system status indicator b01 only, not available for the original Version. Enabling the 4g communication--allows installing 4G Module Inside, Recommendation: SIM7600G-H 4G for Jetson Nano. Jetson nano developer kit compatibility--the case compatible withThis is a binocular camera module which features dual IMX219 cameras onboard, 8Megapixels of each camera.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part NumberJetson Nano Metal Case (C) with Fan
ModelJetson Nano Metal Case (C) with Fan

5. waveshare

#ad

Jetson Nano Metal Case/Enclosure for Jetson Nano Developer Kit and B01A02 & B01 with Camera Holder,Reset and Power Buttons, Support Single or Binocular Camera,Cooling Fan,Wireless-AC8265

#ad
waveshare #ad - Reset and power buttons, with system status indicator B01 only, NOT available for the original version. Jetson nano metal case is compatible with : Jetson Nano Developer Kit Both of the original version and B01 version Case only.

Precise opening design: cut-outs for GPIO header, and peripheral ports, TF card, Recommendation: Wireless-AC8265. Special camera holder, 8mp imx219-160 camera, mounting holes for single camera or binocular camera, 8mp imx219-170 camera, 8mp imx219-120 camera, up to 180° roll angle. Recommendation: 8mp imx219 camera8mp imx219-200 Camera, 8MP IMX219-77 Camera. Allows installing 4g module inside, recommendation: sim7600g-h 4g for Jetson Nano. Internal fan design, heat dissipation through the airflow vent on the top, more elegant design. Recommendation: Fan-4020-PWM-5V. Imx219-83 stereo Binocular Camera.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Height2.76 Inches
Length1.57 Inches
Width1.97 Inches
Part NumberJetson Nano Metal Case
ModelJetson Nano Metal Case

6. GeeekPi

#ad

GeeekPi Acrylic Case for NVIDIA Jetson Nano B01 & A02,with Cooling Fan and Camera HolderJetson Nano, Camera and Network Cable are Not Included

#ad
GeeekPi #ad - Clever opening design, if there is damage, easy access to the peripheral connectors. This is a transparent case made of acrylic material that protects the jetson nano motherboard and places dual cameras.

Acrylic transport is fragile, please contact the seller to get a new repalcement. The bracket of the dual camera is also made of acrylic material, which is very beautiful. Support for installing wireless network card antenna, support fix the camera bracket, supports cooling fan with anti-reverse connection. This case is suitable for the b01&a02 version of Jetson Nano. This kit doesn't contain jetson nano, camera, network cable.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberZP-0101

7. HUAZHU

#ad

HUAZHU NVIDIA Jetson Nano Case, Acrylic Case for NVIDIA Jetson Nano Developer Kit with Cooling Fan3.0-5.8V Shell Enclosure Cooler

#ad
HUAZHU #ad - The case has a protective film on both sides, it could avoid the case to scatches. Please tear it before you used it. Reserve location for memory card slot, usb interface, camera SCI cable, dust-proof; clever open design; easy to access the peripheral connectors; Reserve a small fan hole, to easy to expansion.

Note: the jetson nano development board is not included. Please tear it before you used it. This case is not assembled, need assembled by yourself. The case has a protective film on both sides, it could avoid the case to scatches. Advantages: good-looking, come with fan, you don't need to buy another fan. Dedicated cooling fan for jestion nano: connector: 3pin reverse connector, working voltage: 3. 0-5. 8v, rated voltage: DC5V, Current: 018a, size: 40mm × 40mm × 10mm.
BrandHUAZHU #ad
ManufacturerHUAZHU #ad

8. Geekworm

#ad

Geekworm N100 Metal Case/Enclosure with Power & Reset Control Switch & Camera Holder for Jetson Nano A02/B01/ Jetson Xavier NX

#ad
Geekworm #ad - User manual, support jetson Nano A02&B01 version, pls refer to: raspberrypiwiki N100 A metal case specially designed for jetson nano developer kit rev a02 and b01 by geekworm; New update case verisom with TF card slot has been removed, also support Jetson Xavier NX.

Note: the jetson nano board, antennas and cooling fan are all not included in the packing list; Please note that there are maybe two mixed version cases at amazon warehouse. For the dc 5v power supply, refer to ASIN :B07413Q5Y4. About how to assemble this geekworm n100 case, please refer to: raspberrypiwiki n100, or video for Jetson Nano A02: youtu. Be/spub6h4akp4; video for Jetson Nano B01/2GB: youtu. Be/q5n2aa_z0qi; video for Jetson Xavier NX: youtu. Be/7cqr9R04htc. Also add the vesa mount hole at the case buttom for easy hanging.

Three antenna holes are reserved to faciliate the arrangement of the external antenna and raspberry pi official camera, The diameter of the antenna hole is 7. 3mm. Equippped with power switch and reset switch and camera bracket, refer to asin: b071fnhvxn, and it's reserve the GPIO hole and the installation space of the fan, suggest to use this Noctua NF-A4x20 5V PWM fan, you need to buy the fan yourself, you can also use our 2PIN 5v cooling fan with ASIN: B07WNH6Y8Y.
BrandGeekworm #ad
ManufacturerGeekworm #ad
Part NumberTB-2019-10

9. Yahboom

#ad

Yahboom Acrylic Case for NVIDIA Jetson Nano B01 & A02 with Cooling Fan and Camera Case only for 4GB

#ad
Yahboom #ad - Ordered after june 1, 2020 case compatible with Jetson Nano A02 and B01. Support wireless network card antenna installation, the camera bracket and cooling fan with anti-reverse connection. Please refer to the installation video on this page for installation. There is no installation manual in the package. Jetson nano board acrylic case Protect your Jetson nano motherboard from damage. The package does not contain jetson nano, camera, network cable Note: Installation video is on this page, the package does not contain instructions.
BrandYahboom #ad
Manufacturer1 #ad

10. Makeronics

#ad

Makeronics Acrylic Case/Enclosure Black for Jetson Nano B01 and A02 with Camera Case | Power & Reset Control Switch | Cooling Fan | Assembly Instruction Included

#ad
Makeronics #ad - Notice: jetson nano Board, antenna and Camera Module are not included. Quick-responding technical support. Power on and reset function equippped with power switch and reset switch button.

Camera case camera case with instruction included. More convenient to access GPIO connector and Camera Connector, TF card. Professional support detialed instruction manual. The newly updated case start from 2020/07/15 is compatible for Jetson Nano board both B01 and A02 Version. Support imx219-77, imx219-160, imx219-200 module. Power switch is pretty convenient, No need to pull the cable to restart or reboot your devices, just press the button to turn on and off. Dedicated cooling fan dc 5v pwm cooling fan, 4Pin reverse-proof connector, dimentsions 40mmx40mmx10mm, Make Sure Nano Work Stable. Open case design easy access to the peripheral connectors.
BrandMakeronics #ad
ManufacturerMakeronics #ad