Stanbroil Push Button Ignition Kit with 2 Outlet and Ground Wire for Fire Pit Gas Burner System, AAA Battery

#ad
Stanbroil #ad - Running with a standard aaa battery, this battery operated igniter will cause a spark to ignite the gas when you depress the button, similar to your electronic ignition BBQ. This kit is designed to work with units providing 150, 000 BTUs or less. Will turn your manual ignition fire pit, fireplace, gas burner into an easy to start push button ignition.

2 outlets Push button ignition kit. Requires a battery not included. This kit provides spark ignition for your unit, making the ignition process easier than ever! Spend more time enjoying your guests, while your burner ignites at the push of a button. Mounts to your fire pit gas burner. For units 150, 000 BTUs or less.

Stanbroil Push Button Ignition Kit with 2 Outlet and Ground Wire for Fire Pit Gas Burner System, AAA Battery #ad - The stanbroil push button Ignition Kit is a simple, yet hugely beneficial accessory to your burning unit. Type: flame control system overall depth: 20" heat output: 150, igniter, 000 btus unique feature: Works with AAA or AA batteryDepend on the version you receive Items Included: Switch, and leads & ground wire This easy to use switch arrives with the included igniter and leads needed to function correctly.

Includes switch, igniter, leads & ground wire.

#ad



Stanbroil 1/2-Inch Straight Quarter-Turn Shut-Off Valve Kit for NG LP Gas Fire Pits with Polished Chrome Flange, 3-inch Key and 3/8 Male Flare x 1/2 NPT Fittings x 2

#ad
Stanbroil #ad - The chrome flange will provide a finished professional look to your project. We have offer two 3/8" male flared x 1/2 NPT Fittings for Your Convenience! Our shut off ball valve is controlled by a key so when the key is not inserted in the valve it can't be operated. Our chrome keyed main shut off ball valve kit is what every indoor, outdoor fireplace and fire pit needs to be safe.

Common sense also suggest that a shut off valve be within arms reach for emergencies. 1/2 inch inlet and outlet with standard female NPT threads. This feature keeps small hands from accidentally turning on the gas. Most codes require a shut off valve at the appliance so it is in reach in case of an emergency.

Stanbroil 1/2-Inch Straight Quarter-Turn Shut-Off Valve Kit for NG LP Gas Fire Pits with Polished Chrome Flange, 3-inch Key and 3/8 Male Flare x 1/2 NPT Fittings x 2 #ad - It can be wall or floor mounted. With the valve body on one side of the structure insert the chrome flange and screw down until the structure is sandwiched between the valve and flange. The 3/8 valve has 3/8 male flare fittings, the standard 1/2" valve has 1/2" NPT female threads Straight gas shut off valve kit with standard quarter-turn ball valve.

Recommended for 90, 000 BTU. Chrome flange and Brass Body for Long Life.

#ad



Stanbroil Liquid Propane Fire Pits 1/2" Air Mixer Valve - High Capacity 90K BTU Stainless Steel

#ad
Stanbroil #ad - For propane lP only, Improves Propane burn efficency. Straight gas shut off valve kit with standard quarter-turn ball valve. Reduces sooting normally associated with Propane. We have different numerical value of BTU to choose. Results in higher quality flame appearance. Recommended for 90, 000 BTU. The liquid propane can not burn very well without the air, so in this time you need the air mixer to mix the liquid propane and the air to make fire burning well.

Stanbroil Liquid Propane Fire Pits 1/2" Air Mixer Valve - High Capacity 90K BTU Stainless Steel #ad - Chrome flange and Brass Body for Long Life. I think our stanbroil Air Mixer will help to burn the fire well. All fittings are 1/2 inch npt male threads, 1/2" female or Male with included adapter NPT on Burner Side and 1/2" Male NPT on Incoming Side. We have offer two 3/8" male flared x 1/2 NPT Fittings for Your Convenience!

1/2 inch inlet and outlet with standard female NPT threads. You need the air mixer when you using liquid propane or some other combustible gas for outdoor fire or fire pit. Rated btu's: 90, 000 Max.

#ad



Celestial Fire Glass 24" x 8" Drop-in Fire Pit Pan w/H-Burner, Stainless Steel, 90k BTU

#ad
Celestial Fire Glass #ad - Designed for use with fire glass, our Drop-In Fire Pit Pan provides a "false bottom" for your pit. Includes extra mounting plate for optional igniter igniter not included. Add your own fire glass - choose a color and style to fit your decor. Backyard gatherings will never be the same again. Recommended for 90, 000 BTU.

Straight gas shut off valve kit with standard quarter-turn ball valve. We recommend 20 lbs. Results in higher quality flame appearance. Specifications - 24" x 8" rectangular fire pit burner with a 1/2" NPT threaded male inlet. Installation is a snap: simply drop the pan into your unit, connect to a suitable gas source, and then watch the light show commence.

Celestial Fire Glass 24" x 8" Drop-in Fire Pit Pan w/H-Burner, Stainless Steel, 90k BTU #ad - Choose a fire glass look and color that match your style - and watch the flames dance mesmerizingly across the glass. Of fire glass for this burner pan not included. This reduces the amount of media you need while making the unit appear full. If using liquid propane an LP Air Mixer 90k BTU is required sold separately.

Stainless steel 304 - constructed of high quality #304 Stainless Steel for maximum rust resistance and long life. Rated btu's: 90, 000 Max. For propane lP only, Improves Propane burn efficency.

#ad



Stanbroil Rectangular Drop-in Fire Pit Pan w/H-Burner Installed, 304 Series SS, 36 by 12-Inch, 150,000 BTU Max

#ad
Stanbroil #ad - 1/2 inch inlet and outlet with standard female NPT threads. All fittings are 1/2 inch npt male threads, 1/2" female or Male with included adapter NPT on Burner Side and 1/2" Male NPT on Incoming Side. H-shaped burners are designed to be used only in an outdoor fire pit using natural gas or propane fuels and also be used for gas logs, lava rock, fire glass etc.

Create the feeling of a world class resort in your own back yard with this Fire Pit Burner. Rated btu's: 90, 000 Max. Includes extra mounting plate for optional igniter igniter not included. Add your own fire glass - choose a color and style to fit your decor. Specifications - 24" x 8" rectangular fire pit burner with a 1/2" NPT threaded male inlet.

Stanbroil Rectangular Drop-in Fire Pit Pan w/H-Burner Installed, 304 Series SS, 36 by 12-Inch, 150,000 BTU Max #ad - Enjoy the dancing warmth of a dramatic and luminous campfire flame while gathering around your fire pit with family and friends. We recommend 20 lbs. Chrome flange and Brass Body for Long Life. This product is a 36 by 12-inch stainless Steel Fire Pit H shaped Burner and Rectangular Pan from Stanbroil factory.

Male 1/2 inch gas inlet in bottom center of pan for easy Installation; Includes extra mounting plate for optional igniter igniter not included. Recommended for 90, 000 BTU.

#ad



Stanbroil 1/2" X 24" Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace

#ad
Stanbroil #ad - Apply for propane and natural Gas Ready; 150, 000 BTU Max. 1/2" male flare x 1/2" male npt fitting end, we've included a 1/2" Male Flare x 1/2" Female NPT fitting for your convenience. Includes extra mounting plate for optional igniter igniter not included. Add your own fire glass - choose a color and style to fit your decor.

This non-whistle corrugated flex gas line connector can be used for fire pit and fire pit pan. Recommended for 90, 000 BTU. Results in higher quality flame appearance. Naturally corrosion-resistant to increase flexibility quality flared end fittings to prevent liquid leakage. Of fire glass for this burner pan not included.

Stanbroil 1/2" X 24" Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace #ad - 304 stainless steel construction; Drilled Burner holes Punched holes can cause a loud whistle. Reduces sooting normally associated with Propane. There is a staggered pitch every 2" to Eliminate Whistling. We have offer two 3/8" male flared x 1/2 NPT Fittings for Your Convenience! All fittings are 1/2 inch npt male threads, 1/2" female or Male with included adapter NPT on Burner Side and 1/2" Male NPT on Incoming Side.

Uses approximately 50 pounds of Fireglass. If using liquid propane an LP Air Mixer 90k BTU is required sold separately.

#ad



MeTer Star Propane lpg Gas fire Pit Control Safety Valve Flame Failure Device Cock Gas Heater Valve with thermocouple and knob

#ad
Made In China #ad - Release your hand and it work properly If when you release hand, gas valve shut off again, Please check a. Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. We recommend 20 lbs. Results in higher quality flame appearance. All fittings are 1/2 inch npt male threads, 1/2" female or Male with included adapter NPT on Burner Side and 1/2" Male NPT on Incoming Side.

There is a staggered pitch every 2" to Eliminate Whistling. 2. If the inlet and outlet side well connect with hose you have Possible problems occurs during your use: 1 Valve after turn can not stick during using reason: a. Faston it tightly enough in case of gas leakage 3. Connect thermocouple and end thread well 5.

MeTer Star Propane lpg Gas fire Pit Control Safety Valve Flame Failure Device Cock Gas Heater Valve with thermocouple and knob #ad - If your thermocouple is always be heated on flame b. 1/2" male flare x 1/2" male npt fitting end, we've included a 1/2" Male Flare x 1/2" Female NPT fitting for your convenience. Stanbroil 36" x 12" drop-in pan with a 1 1/4" top flange and Welded H-Burner installed. Fire pit / gas heater valve Inlet and outlet 3/8 Flare thread.

If the thermocouple end is well connect with valve c. Bakelite knob diameter around 40mm, Shaft size 6mm.

#ad



Celestial Fire Glass 48" x 6" Linear Drop-in Fire Pit Pan w/Burner, Stainless Steel, 90k BTU

#ad
Celestial Fire Glass #ad - This burner is rated for up to 90, 000 BTU's. Easy installation - a favorite for diy projects because all you have to do is drop this burner pan into your fire pit, hook up to a gas source, add some fire glass and you're done. Natural gas or lp gas - designed for both natural gas and liquid propane. 1/2" male flare x 1/2" male npt fitting end, we've included a 1/2" Male Flare x 1/2" Female NPT fitting for your convenience.

Rated btu's: 90, 000 Max. Chrome flange and Brass Body for Long Life. Stanbroil 36" x 12" drop-in pan with a 1 1/4" top flange and Welded H-Burner installed. 30" x 6" size built-in linear burner rated for up to 90, 000 btus for use with natural gas or liquid propane "High-grade stainless steel heat- and rust-resistant 1/2" nipple for easy hookup to gas supply Extra mounting plate for optional igniter igniter not incl.

Celestial Fire Glass 48" x 6" Linear Drop-in Fire Pit Pan w/Burner, Stainless Steel, 90k BTU #ad - With lip for no-fuss insertion and removal weep holes in base to prevent water accumulation You'll love knowing your fire pit pan is constructed of premium stainless steel to prevent rusting and warping from the extreme temps of the flames. 1/2 inch inlet and outlet with standard female NPT threads. It's made to last for many years.

Recommended for 90, 000 BTU. Of fire glass for this burner pan not included. 304 stainless steel construction; Drilled Burner holes Punched holes can cause a loud whistle.

#ad



Stanbroil Stainless Steel Linear Trough Drop-In Fire Pit Pan and Burner 36 by 6-Inch

#ad
Stanbroil #ad - This burner can be installed do-it-yourself or by a professional Straight gas shut off valve kit with standard quarter-turn ball valve. Rated btu's: 90, 000 Max. Uses approximately 50 pounds of Fireglass. Design: welded linear burner, male 1/2 Inch Gas Inlet, 65, 000 BTU/Hour rating maximum. Applicability: Natural Gas; Propane LP.

There is a staggered pitch every 2" to Eliminate Whistling. If using liquid propane an LP Air Mixer 90k BTU is required sold separately. Stainless steel 304 - constructed of high quality #304 Stainless Steel for maximum rust resistance and long life. This burner is rated for up to 90, 000 BTU's. Natural gas or liquid propane gas - designed for both natural gas and liquid propane.

Stanbroil Stainless Steel Linear Trough Drop-In Fire Pit Pan and Burner 36 by 6-Inch #ad - Bakelite knob diameter around 40mm, Shaft size 6mm. Suitable for all kinds of low pressure heaters, BBQ stove and ovens. For more installation details and possible problems, see the detailed description below. Of fire glass for this burner pan not included. Stainless steel - made from high quality 304 stainless steal makes this burner and pan durable and long lasting.

1/2" od x 3/8" id 24 inch gas line stainless steel pipe in black coating with fittings.

#ad



Stanbroil Stainless Steel Linear Trough Drop-in Fire Pit Pan and Burner 48 by 6-Inch

#ad
Stanbroil #ad - Csa certified, fit for ng or lp fireplaces and >100K BTU fire pit and fireplace burners. If using liquid propane an LP Air Mixer 90k BTU is required sold separately. Looks terrific with fire glass - Add your own fire glass. This burner is rated for up to 90, 000 BTU's. Easy installation - a favorite for diy projects because all you have to do is drop this burner pan into your fire pit, hook up to a gas source, add some fire glass and you're done.

Natural gas or lp gas - designed for both natural gas and liquid propane. 1/2" od x 3/8" id 24 inch gas line stainless steel pipe in black coating with fittings. Linear trough drop-in fire Pit Pans are the quickest and most economical way to build a fire pit. Includes extra mounting plate for optional igniter igniter not included.

Stanbroil Stainless Steel Linear Trough Drop-in Fire Pit Pan and Burner 48 by 6-Inch #ad - Add your own fire glass - choose a color and style to fit your decor. Package contents: 44" linear burner; 48"x 6" Pan, Includes extra mounting plate for optional igniter igniter not included. All fittings are 1/2 inch npt male threads, 1/2" female or Male with included adapter NPT on Burner Side and 1/2" Male NPT on Incoming Side.

Dimension: 48" x 6"-inch Rectangular Bowl Drop-In Fire Pit Pan. Enjoy the dancing warmth of a dramatic and luminous campfire flame while gathering around your fire pit with family and friends. Uses approximately 50 pounds of Fireglass.

#ad



Stanbroil Rect Drop-in Fire Pit Pan w/H-Burner Installed, 304 Series SS, 24 by 8-Inch, 90,000 BTU Max

#ad
Stanbroil #ad - Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance. Apply for propane and natural Gas Ready; 150, 000 BTU Max. This product is a 24 by 8-inch stainless Steel Fire Pit H shaped Burner and Rectangular Pan from Stanbroil factory. Design: welded linear burner, male 1/2 Inch Gas Inlet, 65, 000 BTU/Hour rating maximum.

Applicability: Natural Gas; Propane LP. Rated btu's: 90, 000 Max. 1/2" male flare x 1/2" male npt fitting end, we've included a 1/2" Male Flare x 1/2" Female NPT fitting for your convenience. Pan includes extra mounting plate for optional igniter igniter not included. Dimension: 36" x 6"-inch Rectangular Bowl Drop-In Fire Pit Pan.

Stanbroil Rect Drop-in Fire Pit Pan w/H-Burner Installed, 304 Series SS, 24 by 8-Inch, 90,000 BTU Max #ad - Package contents: 44" linear burner; 48"x 6" Pan, Includes extra mounting plate for optional igniter igniter not included. All fittings are 1/2 inch npt male threads, 1/2" female or Male with included adapter NPT on Burner Side and 1/2" Male NPT on Incoming Side. Stanbroil 36" x 12" drop-in pan with a 1 1/4" top flange and Welded H-Burner installed.

Reduces sooting normally associated with Propane. Stanbroil 24" x 8" drop-in pan with a 1 1/4" top flange and Welded H-Burner installed. Straight gas shut off valve kit with standard quarter-turn ball valve.

#ad