Rudedog USA 5004 Lock Collar with Rubber Gromet Kit for 7/8″ Hex bar only

#ad
Rudedog USA #ad - Hex sleever bar. Rudedog usa - 7/8" lock collar & grommett - #5004 if you have a 7/8" Hex Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Tighten down with a 5/32" hex wrench. Made in the USA. Wet the inside of grommet for easy positioning up the bar. Fits most 7/8" dia.

#ad



Klein Tools 5416TFR Bolt Bag, Flame Resistant Canvas Bag for Bolt Storage with Double Bottom and Tunnel Loop, 9-Inch

#ad
Klein - Geneva Supply 5416TFR #ad - Klein Tools 5416TFR Bolt Bag, Flame Resistant Canvas Bag for Bolt Storage with Double Bottom and Tunnel Loop, 9-Inch #ad - Tunnel loop for sliding over belt. Assembled in usa of U. S. Meets the performance requirement of NFPA -701. For added protection in the field, Klein's flame-retardant canvas bolt bag is made of flame-resistant No. And imported components. The hard leather bottom is flame retardant meeting the performance requirements of NFPA-701.

Features convenient tunnel loop for sliding over your belt. 4 canvas. Flame retardant, hard-leather bottom.

#ad



RudedogUSA Sleever Bar Holder Original Version

#ad
RudedogUSA #ad - Rudedog premium black Leather Sleever Bar Holder Flame retardant, hard-leather bottom. Leather. Meets the performance requirement of NFPA -701. And imported components. Assembled in usa of U. S. Tunnel loop for sliding over belt. Holds sleever bars.

#ad



OTC 7168 30" Jimmy Bar

#ad
OTC 7168 #ad - Forged from chrome alloy steel. Heat-treated to resist bending. 7/8” diameter and 30” long. Tunnel loop for sliding over belt. Meets the performance requirement of NFPA -701. 30 inches in length. Holds sleever bars. 7/8 inch diameter. The otc 7168 jimmy bar is forged from chrome alloy steel, and then heat treated to resist bending and breaking.

Leather. Flame retardant, hard-leather bottom. And imported components. Assembled in usa of U. S.

#ad



30-Inch Hex Bar Klein Tools 3242

#ad
Klein 3242 #ad - Meets the performance requirement of NFPA -701. Assembled in usa of U. S. Leather. Chisel-end is at a 15-degree angle to give greater leverage. Forged fit-up bar is pointed on one end. Provides extra leverage when positioning steel members and aligning bolt holes. 7/8 inch diameter. 30 inches in length. Klein tools 3242 30-inch hex, 3/4-inch diameter connecting bar Flame retardant, hard-leather bottom.

30-Inch Hex Bar Klein Tools 3242 #ad - Tunnel loop for sliding over belt. And imported components. Diameter: 3/4-inch. Forged from chrome alloy steel. Length: 30 inches. Heat-treated to resist bending. Holds sleever bars.

#ad



Klein Tools 5416T Bolt Bag, Canvas Tool Pouch for Bolt/Bull Pin Storage with Tunnel Loop Belt Connection

#ad
Klein - Geneva Supply 5416T #ad - Tunnel belt connection accepts belts up to 3-Inches wide. 4 canvas with double bottom for added durability. Length: 30 inches. Tunnel loop for sliding over belt. And imported components. Klein isn't just the name of our company, it's also our family name. Provides extra leverage when positioning steel members and aligning bolt holes.

Klein Tools 5416T Bolt Bag, Canvas Tool Pouch for Bolt/Bull Pin Storage with Tunnel Loop Belt Connection #ad - Klein tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day. Klein tools' bull-pin and bolt bag is built from sturdy canvas with a double layer of canvas on the bottom where it's needed most. And since we're an american company that's family-owned and family-run, you know you can count on us to be here tomorrow.

Assembled in usa of U. S. Having durable storage solutions on the jobsite is a must. 30 inches in length. Diameter: 3/4-inch. Meets the performance requirement of NFPA -701. 7/8 inch diameter.

#ad



Hex Bar, 36-Inch Klein Tools 3243

#ad
Klein 3243 #ad - Provides extra leverage when positioning steel members and aligning bolt holes. Chisel-end is at a 15-Degree angle to give greater leverage. Forged fit-up bar is pointed on one end. Tunnel loop belt connection. Designed to provide a heavy-duty solution in steel and concrete construction applications. Stitched and riveted for added strength.

Hex Bar, 36-Inch Klein Tools 3243 #ad - Forged fit-up bar is pointed on one end. Holds sleever bars. No. Chisel-end is at a 15-degree angle to give greater leverage. Tunnel loop for sliding over belt. Meets the performance requirement of NFPA -701. Provides extra leverage when positioning steel members and aligning bolt holes. Leather. 30 inches in length.

Assembled in usa of U. S. And imported components. Klein tools 3243 36-inch hex bar Flame retardant, hard-leather bottom. Bolt bag with bull-pin loop on each side.

#ad



Rudedog USA 5003 Lock Collar with Grommet Kit. For 3/4" Hex Bar only

#ad
Rudedog USA #ad - Diameter: 3/4-inch. Forged fit-up bar is pointed on one end. And imported components. Length: 30 inches. Chisel-end is at a 15-Degree angle to give greater leverage. Flame retardant, hard-leather bottom. Tighten down with a 5/32" hex wrench. Rudedog usa - 3/4" lock collar & grommett - #5003 if you have a 3/4" Hex Sleever Bar, this should be the last stopper you need to hold your bar in your holder.

Leather. Forged fit-up bar is pointed on one end. Fits most 3/4" dia. Tunnel loop for sliding over belt. Chisel-end is at a 15-degree angle to give greater leverage. Provides extra leverage when positioning steel members and aligning bolt holes. 7/8 inch diameter. 4 canvas with double bottom for added durability. Tunnel loop belt connection.

Rudedog USA 5003 Lock Collar with Grommet Kit. For 3/4" Hex Bar only #ad - Hex sleever bar. Forged from chrome alloy steel. Meets the performance requirement of NFPA -701. Holds sleever bars.

#ad



-P - Klein Tools 3255 Broad-Head Bull Pin Made of Forged, Heat-Treaded Steel With Black Finish, 1-1/4-Inch x 13.75-Inch

#ad
Klein - Geneva Supply -P #ad - Provides extra leverage when positioning steel members and aligning bolt holes. 4 canvas with double bottom for added durability. Long, even taper reduces binding and hang-up. 1-1/4-inch bull pin has angled head to limit the danger of chipping. Tunnel loop belt connection. No. Angled head and smooth blending of radii increase strength and reduce the danger of chipping.

Bolt bag with bull-pin loop on each side. Provides extra leverage when positioning steel members and aligning bolt holes. Heat-treated for strength. Flame retardant, hard-leather bottom. 30 inches in length. Meets the performance requirement of NFPA -701. Forged fit-up bar is pointed on one end. Length: 30 inches. Holds sleever bars.

-P - Klein Tools 3255 Broad-Head Bull Pin Made of Forged, Heat-Treaded Steel With Black Finish, 1-1/4-Inch x 13.75-Inch #ad - Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Forged, heat-treated bull pin increases efficiency by providing a larger striking surface.

Heat-treated to resist bending.

#ad



Klein Tools 3248 Connecting Bar, 7/8-Inch Round by 30-Inch Long

#ad
Klein 3248 #ad - Length: 30 inches. Long, even taper reduces binding and hang-up. Provides extra leverage when positioning steel members and aligning bolt holes. Tunnel loop belt connection. Leather. 7/8 inch diameter. No. Meets the performance requirement of NFPA -701. Angled head and smooth blending of radii increase strength and reduce the danger of chipping.

Other hex bar sizes sold separately. Provides extra leverage when positioning steel members and aligning bolt holes. Forged fit-up bar is pointed on one end. Forged from chrome alloy steel. Forged fit-up bar is pointed on one end. Forged, heat-treated bull pin increases efficiency by providing a larger striking surface.

Klein Tools 3248 Connecting Bar, 7/8-Inch Round by 30-Inch Long #ad - Provides extra leverage when positioning steel members and aligning bolt holes. Designed to provide a heavy-duty solution in steel and concrete construction applications. Klein tools 3248 30-inch round connecting bar, 7/8-inch diameter Flame retardant, hard-leather bottom. Holds sleever bars. Chisel-end is at a 15-degree angle to give greater leverage.

#ad



Rudedog 3011 - Lace Up Double Bullpin Holder

#ad
Rudedog USA 3011 #ad - Other hex bar sizes sold separately. Fits up to a 2 1/2 inch belt. Tunnel loop belt connection. Heat-treated to resist bending. 4 canvas with double bottom for added durability. Tunnel loop for sliding over belt. Forged from chrome alloy steel. Angled head and smooth blending of radii increase strength and reduce the danger of chipping.

Designed to provide a heavy-duty solution in steel and concrete construction applications. Rudedog usa - lace up double bullpin holder #3011 This Double Bullpin Holder accommodates a 10" or 13" bullpin. Provides extra leverage when positioning steel members and aligning bolt holes. 30 inches in length. Head design also reduces chance of pin slipping from the hand when aligning holes.

Rudedog 3011 - Lace Up Double Bullpin Holder #ad - Long, even taper reduces binding and hang-up. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. Chisel-end is at a 15-Degree angle to give greater leverage. Meets the performance requirement of NFPA -701. Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins.

Bolt bag with bull-pin loop on each side.

#ad