Hakko CHP 5B-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Thin-Tapered Bent Sharp Tips, 4-1/4″ Length

#ad
Quality Hand Tools 5B-SA #ad - The tweezers is 4-1/4" 110mm long. American hakko Products manufactures soldering and desoldering tools. The non-magnetic stainless steel construction resists corrosion. Bent tines provide high visibility in delicate applications. Smooth shaft for general handling and positioning applications. Pattern 5b tweezers with super-fine point tips and bent tines for use in electronics assembly.

. Non-magnetic stainless steel construction resists corrosion. The tines are bent to 40 degrees to provide high visibility in delicate applications. 4-1/4" 110mm length. The company, founded in 1984, is headquartered in Valencia, CA. The hakko chp 5b-sa pattern 5b tweezers with super-fine points have a smooth shaft and bent tines for use in electronics assembly applications.

#ad



Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length

#ad
Quality Hand Tools 3-SA #ad - The tweezers is 4-3/4" 120mm long. American hakko Products manufactures soldering and desoldering tools. 4-3/4" 120mm length. The hakko chp 3-sa pattern 3 tweezers with very-fine points have a smooth shaft for use in electronics assembly applications. Pattern 3 tweezers with very-fine point tips for use in electronics assembly.

The fine-point tips provide access to tight areas and are used for delicate precision work. Non-serrated tip for delicate applications. The company, is headquartered in Valencia, founded in 1984, CA. The non-magnetic stainless steel construction resists corrosion. Non-magnetic stainless steel construction resists corrosion.

Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length #ad - Smooth shaft for general handling and positioning applications.

#ad



Hakko CHP 5-SA Stainless Steel Non-Magnetic Precision Tweezers with Super-Fine Point Thin-Tapered Sharp Tips, 4-1/4" Length

#ad
Quality Hand Tools 5-SA #ad - Smooth shaft for general handling and positioning applications. Non-magnetic stainless steel construction resists corrosion. Smooth shaft for general handling and positioning applications. The hakko chp 5-sa pattern 5 tweezers with super-fine points have a smooth shaft and sharply tapered tines for use in electronics assembly applications.

. The tweezers is 4-1/4" 110mm long. American hakko Products manufactures soldering and desoldering tools. The non-magnetic stainless steel construction resists corrosion. 4-3/4" 120mm length. The tapered tips provide access to tight areas and are used for delicate precision work. Non-serrated tip for delicate applications.

Hakko CHP 5-SA Stainless Steel Non-Magnetic Precision Tweezers with Super-Fine Point Thin-Tapered Sharp Tips, 4-1/4" Length #ad - The company, is headquartered in Valencia, founded in 1984, CA. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. 4-1/4" 110mm length. Non-magnetic stainless steel construction resists corrosion. Non-serrated tip for delicate applications. Pattern 5 tweezers with super-fine point tips and sharply tapered tines for use in electronics assembly.

#ad



Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length

#ad
Quality Hand Tools 7-SA #ad - The non-magnetic stainless steel construction resists corrosion. The company, is headquartered in Valencia, founded in 1984, CA. Smooth shaft for general handling and positioning applications. The curved tines ease gripping in high-density areas. Non-serrated tip for delicate applications. 4-1/2" 118mm length.

Smooth shaft for general handling and positioning applications. Non-magnetic stainless steel construction resists corrosion. Non-magnetic stainless steel construction resists corrosion. Curved tines ease gripping in high-density areas. Smooth shaft for general handling and positioning applications. The hakko chp 7-sa pattern 7 tweezers with very-fine points have a smooth shaft and curved tines for use in electronics assembly applications.

Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length #ad - Pattern 3 tweezers with very-fine point tips for use in electronics assembly. Non-serrated tip for delicate applications. Pattern 7 tweezers with very-fine point and curved tips for use in electronics assembly. The tweezers is 4-1/2" 118mm long. American hakko Products manufactures soldering and desoldering tools.

#ad



Hakko CHP 105-SA Stainless Steel Non-Magnetic Tweezers for Handling SMD Components and SOT Packages, Curved shaft, 2.5mm Flat Tips, 4-3/4" Length

#ad
Quality Hand Tools 105-SA #ad - Non-magnetic stainless steel construction resists corrosion. Pattern 105 tweezers with flat-tip on curved shaft for use in electronics assembly. Pattern 7 tweezers with very-fine point and curved tips for use in electronics assembly. 4-1/4" 110mm length. Pattern 5 tweezers with super-fine point tips and sharply tapered tines for use in electronics assembly.

4-1/2" 118mm length. Non-serrated tip for delicate applications. The curved shaft and 2. 5mm-wide flat tips ease vertical handling of surface mount device SMD components and small outline transistor SMT packages. Non-serrated tip for delicate applications. Curved tines ease gripping in high-density areas. Non-magnetic stainless steel construction resists corrosion.

Hakko CHP 105-SA Stainless Steel Non-Magnetic Tweezers for Handling SMD Components and SOT Packages, Curved shaft, 2.5mm Flat Tips, 4-3/4" Length #ad - 2. 5mm-wide flat tips on curved shaft for handling SMD components and SOT packages. Smooth shaft for general handling and positioning applications. Non-magnetic stainless steel construction resists corrosion. Pattern 3 tweezers with very-fine point tips for use in electronics assembly.

#ad



Hakko CHP 7A-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Bent Tips, Heavy-Duty Tips, 4-1/2" Length

#ad
Quality Hand Tools 7A-SA #ad - The heavy-duty curved tines provide a strong grip and ease gripping in high-density areas. Non-serrated tip for delicate applications. Smooth shaft for general handling and positioning applications. 4-1/2" 118mm length. Smooth shaft for general handling and positioning applications. Smooth shaft for general handling and positioning applications.

Non-serrated tip for delicate applications. 4-1/2" 118mm length. Pattern 105 tweezers with flat-tip on curved shaft for use in electronics assembly. 2. 5mm-wide flat tips on curved shaft for handling SMD components and SOT packages. The hakko chp 7a-sa pattern 7a tweezers with very-fine points have a smooth shaft and curved tines for use in electronics assembly applications.

Hakko CHP 7A-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Bent Tips, Heavy-Duty Tips, 4-1/2" Length #ad - Pattern 3 tweezers with very-fine point tips for use in electronics assembly. 4-3/4" 120mm length. Non-magnetic stainless steel construction resists corrosion. Smooth shaft for general handling and positioning applications. Non-magnetic stainless steel construction resists corrosion. Heavy-duty curved tines ease gripping in high density areas.

#ad



Hakko CHP 2A-SA Stainless Steel Non-Magnetic Precision Tweezers with Rounded Tips, Thin Tapered Tines, 4-3/4" Length

#ad
Quality Hand Tools 2A-SA #ad - Smooth shaft for general handling and positioning applications. 2. 5mm-wide flat tips on curved shaft for handling SMD components and SOT packages. Smooth shaft for general handling and positioning applications. 4-1/2" 118mm length. Curved tines ease gripping in high-density areas. Non-magnetic stainless steel construction resists corrosion.

4-1/2" 118mm length. The tweezers is 4-3/4" 120mm long. American hakko Products manufactures soldering and desoldering tools. 4-3/4" 120mm length. Smooth shaft for general handling and positioning applications. The company, is headquartered in Valencia, founded in 1984, CA.4-3/4" 120mm length. Smooth shaft for general handling and positioning applications.

Hakko CHP 2A-SA Stainless Steel Non-Magnetic Precision Tweezers with Rounded Tips, Thin Tapered Tines, 4-3/4" Length #ad - The non-magnetic stainless steel construction resists corrosion. The hakko chp 2a-sa pattern 2a tweezers with rounded points have a smooth shaft and tapered tines for use in electronics assembly applications. Non-magnetic stainless steel construction resists corrosion. Heavy-duty curved tines ease gripping in high density areas.

4-3/4" 120mm length.

#ad



Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel

#ad
Quality Hand Tools PN-2007 #ad - Flat outside edge eases access to recessed or component-dense areas. The company, is headquartered in Valencia, founded in 1984, CA. Non-magnetic stainless steel construction resists corrosion. Nonslip hand grips provide comfort and control, and a dolphin-style curved fore-edge protects hands from cutting surfaces.

The 3mm heat-treated carbon steel construction provides durability and long life. Non-serrated tip for delicate applications. Smooth shaft for general handling and positioning applications. 4-3/4" 120mm length. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. Long flat-nose pliers with 3mm width for general purpose electronics applications.

Hakko CHP PN-2007 Long-Nose Pliers, Flat Nose, Flat Outside Edge, Serrated Jaws, 32mm Jaw Length, 3mm Nose Width, 3mm Thick Steel #ad - Pattern 7a tweezers with very-fine point and curved tips for use in electronics assembly. Smooth shaft for general handling and positioning applications. Parkerized surfaces prevent glare and increase corrosion resistance. American hakko Products manufactures soldering and desoldering tools. 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance.

The flat nose reduces the risk of damage to delicate parts and provides a wider surface for gripping parts.

#ad



Tack Flux no clean in a 10cc syringe w/plunger & tip

#ad
Chipquik SMD291 #ad - Special removal alloy has excellent wetting ability with a low melting temperature of 136F 58C. Non-serrated tip for delicate applications. 4-3/4" 120mm length. Non-magnetic stainless steel construction resists corrosion. Non-magnetic stainless steel construction resists corrosion. Flat outside edge eases access to recessed or component-dense areas.

4-3/4" 120mm length. Remove qfds, plccs, soics and chip components without costly and complex equipment. Smooth shaft for general handling and positioning applications. Long flat-nose pliers with 3mm width for general purpose electronics applications. Smooth shaft for general handling and positioning applications.

Tack Flux no clean in a 10cc syringe w/plunger & tip #ad - 4-1/4" 110mm length. 32mm serrated jaw with precision-ground surfaces provides smooth operation. 4-3/4" 120mm length. Pattern 5 tweezers with super-fine point tips and sharply tapered tines for use in electronics assembly. Non-magnetic stainless steel construction resists corrosion. Non-magnetic stainless steel construction resists corrosion.

#ad



Hakko CHP 110-SA Stainless Steel Non-Magnetic Tweezers for Handling Chip and SMD Components, Flat Tip, Approximately 90 Degree Angle Tip, 4-3/4" Length

#ad
Quality Hand Tools 110-SA #ad - Non-serrated tip for delicate applications. Pattern 105 tweezers with flat-tip on curved shaft for use in electronics assembly. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. 4-3/4" 120mm length. Smooth shaft for general handling and positioning applications. 4-3/4" 120mm length. Non-magnetic stainless steel construction resists corrosion.

Use with existing rework equipment or temp controlled soldering irons. Remove qfds, plccs, soiCs and chip components without costly equipment. 32mm serrated jaw with precision-ground surfaces provides smooth operation. 4-1/2" 118mm length. Smooth shaft for general handling and positioning applications. Long flat-nose pliers with 3mm width for general purpose electronics applications.

Hakko CHP 110-SA Stainless Steel Non-Magnetic Tweezers for Handling Chip and SMD Components, Flat Tip, Approximately 90 Degree Angle Tip, 4-3/4" Length #ad - 2. 5mm-wide flat tips on curved shaft for handling SMD components and SOT packages. 4-3/4" 120mm length. Smooth shaft for general handling and positioning applications. The hakko chp 110-sa pattern 110 fine-shaft tweezers have an angled flat tip and smooth grip for use in electronics assembly applications. Smooth shaft for general handling and positioning applications.

#ad



MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser Complete with Plunger & Dispensing Tip

#ad
MG Chemicals 8341-10ML #ad - Remove qfds, plccs, soiCs and chip components without costly equipment. Pattern 5 tweezers with super-fine point tips and sharply tapered tines for use in electronics assembly. Pattern 7a tweezers with very-fine point and curved tips for use in electronics assembly. Pattern 2a tweezers with rounded points and tapered tines for use in electronics assembly.

4-3/4" 120mm length. Excellent wettability, non-conductive, no clean, non-tacky residues, compatible with lead free and leaded solder systems, thixotropic paste and RoHS compliant. Smooth shaft for general handling and positioning applications. Smooth shaft for general handling and positioning applications.

MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser Complete with Plunger & Dispensing Tip #ad - 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance. Pattern 7 tweezers with very-fine point and curved tips for use in electronics assembly. Thixotropic paste; RoHS compliant. Smooth shaft for general handling and positioning applications.

Special removal alloy has excellent wetting ability. Safe, affordable, easy and won't damage sensitive components. Flat tips are mounted at almost 90 degrees to ease handling of circuit board chips and SMD components.

#ad