Fastronix 3/8″ Stud Terminal Covers Red and Black

#ad
Fastronix Solutions #ad - Use with 2/0 or Smaller Battery Cable. The flexible cover is made to be installed over a 3/8" stud junction block but can be slightly stretched to cover a larger stud. These terminal boots can be used with any 3/8" stud type junction blocks to protect against accidental shorting and corrosion while improving appearance.

Fastronix 3/8" Stud Terminal Covers Red and Black #ad - Prevent Incidental Shorting. Use with fastronix 406-252 Junction Blocks. Available in red and black, or pairs of red or black. Flexible cover is designed to Fit over 3/8" Stud and Nut. Improve the looks of your wiring with Fastronix! Includes 1 red and 1 Black Terminal Cover.

#ad



Fastronix 3/8" Stainless Steel Single Stud Power and Ground Junction Block Red and Black

#ad
Fastronix Solutions #ad - Can be used for power or ground distribution and can be mounted in any orientation. Features two mounting holes. Includes 1 red and 1 Black 3/8" Junction Block. Use with fastronix stud covers 404-110 / 404-111 for a Complete Installation. Integrated nut at the Bottom of the Stud for Tightening. Mounts with #10 Machine Screws.

Mounts with #10 machine screw. 3/8" single stud power and ground junction block. Sturdy nylon construction with stainless steel stud and hardware. Red and black Nylon Construction with Mounting Holes.

#ad



Fastronix Premium High Current Thru Panel Battery Terminal Connectors

#ad
Fastronix Solutions #ad - Combine these with fastronix terminal covers and you'll have professional looking wiring your friends will envy! Maximum torque on the 3/8" studs is 212 in-lbs. The 3/8" studs allow your battery connections to remain tight during the roughest conditions. Mount in panels up to 7/16" Thick in a 1-17/64" Hole.

Mounts with #10 Machine Screws. Durable nylon backing nut eliminates any Question of Shorting and These Can be Mounted in Metal Panels. Use with fastronix stud covers 404-110 / 404-111 for a Complete Installation. 3/8" studs rated to 440 amps @ 12 Volts with Momentary 550 Amp Spikes. Includes 1 red and 1 Black 3/8" Junction Block.

Fastronix Premium High Current Thru Panel Battery Terminal Connectors #ad - Inner copper Core for High Current Applications. Use with fastronix rubber terminal Covers 404-110 and 404-111 for a Professional Installation. Applying too much torque to the studs may cause damage. The fastronix premium feed Thru is perfect for any high current applications where power must be fed through a panel.

Integrated nut at the Bottom of the Stud for Tightening. Red and black Nylon Construction with Mounting Holes.

#ad



Fastronix 5/16" Stud Terminal Covers Red and Black

#ad
Fastronix Solutions #ad - Use with wire Diameter Up to 1/2". Integrated nut at the Bottom of the Stud for Tightening. Includes 1 red and 1 Black Flexible Terminal Cover. Red and black Nylon Construction with Mounting Holes. Great for alternator, starter or solenoid studs. Use with fastronix stud covers 404-110 / 404-111 for a Complete Installation.

3/8" studs rated to 440 amps @ 12 Volts with Momentary 550 Amp Spikes. Use with fastronix 406-251 Junction Blocks. These terminal boots can be used with stud type junction blocks, or any stud terminal 5/16" and smaller to protect against accidental shorting and corrosion while improving appearance. Includes 1 red and 1 Black 3/8" Junction Block.

Fastronix 5/16" Stud Terminal Covers Red and Black #ad - Prevent incidental Shorting and Improve the Appearance of Your Wiring! Mount in panels up to 7/16" Thick in a 1-17/64" Hole. Inner copper Core for High Current Applications. Also available in pairs of red or black. Durable nylon backing nut eliminates any Question of Shorting and These Can be Mounted in Metal Panels.

Use with 5/16" or smaller Studs to Fit over Nut. Mounts with #10 Machine Screws. Use with fastronix rubber terminal Covers 404-110 and 404-111 for a Professional Installation.

#ad



Fastronix Red and Black Premium Battery Charging Posts with Heavy Duty Mounting Plate

#ad
Fastronix Solutions #ad - Includes 1 red and 1 Black Flexible Terminal Cover. Utilizes heavy duty nylon hex back nut for a secure fit. Use with 5/16" or smaller Studs to Fit over Nut. Red and black Nylon Construction with Mounting Holes. Integrated nut at the Bottom of the Stud for Tightening. Inner copper Core for High Current Applications.

0080" mounting plate with three 9/32" Mounting Holes and Terminal Separator. Made in the USA! Use with fastronix 406-251 Junction Blocks. Terminals are mounted in a 0080" painted mounting plate which includes three 9/32" holes. Brass charging post with Nickel Plated 3/8" Studs. Can be mounted in ANY Orientation.

Fastronix Red and Black Premium Battery Charging Posts with Heavy Duty Mounting Plate #ad - Use with wire Diameter Up to 1/2". Features brass outer core for high energy transfer with a nickel plated 3/8" steel shaft for high torque strength. Attach the mounting plate in any orientation although terminal covers may slide off due to vibration if the are mounted in a downward direction. Durable nylon backing nut eliminates any Question of Shorting and These Can be Mounted in Metal Panels.

Mounts with #10 Machine Screws.

#ad



Positive Insulated Battery Power Junction Post Block 3/8 Lug X 16 thread Red & Black Set

#ad
#ad - 0080" mounting plate with three 9/32" Mounting Holes and Terminal Separator. Made in the USA!3/8" studs rated to 440 amps @ 12 Volts with Momentary 550 Amp Spikes. Integrated nut at the Bottom of the Stud for Tightening. 3/8". Prevent incidental Shorting and Improve the Appearance of Your Wiring! Use with fastronix stud covers 404-110 / 404-111 for a Complete Installation.

Positive Insulated Battery Power Junction Post Block 3/8 Lug X 16 thread Red & Black Set #ad - . Inner copper Core for High Current Applications. Red and black Nylon Construction with Mounting Holes. Use with fastronix 406-251 Junction Blocks. Use with 5/16" or smaller Studs to Fit over Nut. Use with wire Diameter Up to 1/2". 3/8" bolt post molded into a composite insulating base that can be screwed or bolted down.

Includes 1 red and 1 Black Flexible Terminal Cover. Useful for customizing vehicles or relocating batteries. Brass charging post with Nickel Plated 3/8" Studs. Use with fastronix 404-120 Terminal Covers for a Professional Looking Installation. Mounts with #10 Machine Screws. Insulated.

#ad



Thru Panel Battery Cable Bulkhead Connectors with Copper Core 3/8" Terminal Post, Red and Black

#ad
R2X Racing #ad - 3/8". Red and black Nylon Construction with Mounting Holes. Made in the USA! Solve your electrical power cable woes with this set of thru panel bulkhead connectors. Inner copper Core for High Current Applications. Integrated nut at the Bottom of the Stud for Tightening. 3/8" studs rated to 440 amps @ 12 Volts with Momentary 550 Amp Spikes.

Multiple applications: You won't find a better firewall connector for automotive power cables. Car audio terminals: Easily wire your amp or remote batteries for a clean car stereo install. Battery relocation kit: Great solution for remote mount batteries and shutoff switch projects. Marine electrical: Great bulkhead connectors for positive and ground cables for your boat.

Thru Panel Battery Cable Bulkhead Connectors with Copper Core 3/8" Terminal Post, Red and Black #ad - 100% satisfaction guaranteed: If you have any issues with your order, contact us and we will make it right. Use with fastronix 404-120 Terminal Covers for a Professional Looking Installation. Use with fastronix 406-251 Junction Blocks. Mounts with #10 Machine Screws. The connectors are rated for a maximum of 48 volts and can be used in a variety of applications from car audio to marine and others.

Mount in panels up to 7/16" Thick in a 1-17/64" Hole. The solid copper cores allow for up to 550 amps of current to be transmitted, while the glass-filled nylon body eliminates the risk of shorts.

#ad



SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - Durable nylon backing nut eliminates any Question of Shorting and These Can be Mounted in Metal Panels. Brass charging post with Nickel Plated 3/8" Studs. Mounts with #10 Machine Screws. Includes 1 red and 1 Black Flexible Terminal Cover. Use with fastronix 406-251 Junction Blocks. Insulated. Prevent incidental Shorting and Improve the Appearance of Your Wiring!

Use with fastronix stud covers 404-110 / 404-111 for a Complete Installation. Use with fastronix rubber terminal Covers 404-110 and 404-111 for a Professional Installation. Made in the USA! Includes 1 red and 1 Black 3/8" Junction Block. Lugs are suitable for use with Welding Cables and Battery Cables. Use with wire Diameter Up to 1/2".

SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Inner copper Core for High Current Applications. Use with fastronix 404-120 Terminal Covers for a Professional Looking Installation. Use with 5/16" or smaller Studs to Fit over Nut. Integrated nut at the Bottom of the Stud for Tightening. 3/8" studs rated to 440 amps @ 12 Volts with Momentary 550 Amp Spikes. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard.

#ad



Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft

#ad
Young4us 43237-2 #ad - Use with fastronix rubber terminal Covers 404-110 and 404-111 for a Professional Installation. The young4us durable heat shrink tubes are made from polyolefin, which resist to harsh environment and have a high heat-shrinkable ratio of 3:1, the internal layer is coated by hot-melt adhesive, which has satisfied bonding performance.

Brass charging post with Nickel Plated 3/8" Studs. Package content: 1 x heat shrink tubingblack 1. 22m4ft 1 x heat shrink tubingred1. 22m4ft includes 1 red and 1 Black 3/8" Junction Block. Product advantages: durable structure with fast heat-shrinkage, high heat-shrinkable ratio, strong heat-shrinkable stress.

Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft #ad - Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Our tubes are with standard of RoHS and you can use heat gun, alcohol lamp, lighter or air drier to heat them. Insulated. Made in the USA! Material: polyolefin. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1.

22m4ft. Includes 1 red and 1 Black Flexible Terminal Cover.

#ad



Fastronix Red and Black Top Post Style Flexible Battery Terminal Cover

#ad
404-100 #ad - Use with fastronix 406-251 Junction Blocks. Close end pad seals Out Moisture Keeping Cables Dry. Includes 1 red and 1 Black Flexible Terminal Cover. Rated voltage: 600V. Can be Crimped or Soldered. Use with fastronix 405-003 and 405-004 for a Complete Installation. Use with fastronix stud covers 404-110 / 404-111 for a Complete Installation.

Fastronix Red and Black Top Post Style Flexible Battery Terminal Cover #ad - Use with fastronix rubber terminal Covers 404-110 and 404-111 for a Professional Installation. Includes 1 red and 1 Black Terminal Cover. 3/8". 0080" mounting plate with three 9/32" Mounting Holes and Terminal Separator. 3/8" studs rated to 440 amps @ 12 Volts with Momentary 550 Amp Spikes. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C.

Integrated nut at the Bottom of the Stud for Tightening. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Mount in panels up to 7/16" Thick in a 1-17/64" Hole. Insulated. Made in the USA!

#ad



SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

#ad
SELTERM #ad - 3/8" studs rated to 440 amps @ 12 Volts with Momentary 550 Amp Spikes. Red and black Nylon Construction with Mounting Holes. Inner copper Core for High Current Applications. Corrosion free Ideal for Marine Automotive or Outdoor Use. Main color: black & red. Use with fastronix rubber terminal Covers 404-110 and 404-111 for a Professional Installation.

Heavy duty construction for Enhanced High Temperature Durability. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product. Mount in panels up to 7/16" Thick in a 1-17/64" Hole. Insulated. Includes 1 red and 1 Black Flexible Terminal Cover. Use with fastronix 404-120 Terminal Covers for a Professional Looking Installation.

SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets #ad - Close end pad seals Out Moisture Keeping Cables Dry. Use with 5/16" or smaller Studs to Fit over Nut. Rated voltage: 600V. Made from 100% annealed Tinned Copper for Max Current Flow. Integrated nut at the Bottom of the Stud for Tightening. To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117.

#ad